A fake Rolex 124060 is a counterfeit copy of the 41mm Submariner No Date. The genuine watch uses a 41mm Oystersteel case, a black ceramic Cerachrom bezel, and the caliber 3230 with a 70-hour power reserve. Replicas usually fail at the case profile, the rehaut engraving, and the movement finish, not at the dial print.
What makes the 124060 hard to copy?
The 124060 replaced the 114060 in 2020 with a wider 41mm case, slimmer lugs, and a 21mm lug width. Its no-date layout removes the cyclops, so the crystal, dial, and bezel sit under closer visual scrutiny. That simplicity helps buyers spot flaws that a date window would distract from.
How can you tell a replica 124060 from a genuine one?
Work through the physical checks in order, because each one exposes a different grade of counterfeit.
- Case profile: Genuine lugs taper with a soft crown guard blend. Fakes often look slab-sided or have a sharp lug-to-case transition.
- Rehaut engraving: The ROLEX repeat should align with the minute track and be crisp. Replicas show shallow, uneven, or misaligned letters.
- Bezel action: A genuine Cerachrom bezel clicks through 120 positions with no back play. Replica bezels feel gritty or spin too freely.
- Dial and lume: Genuine Chromalight plots sit flush and glow evenly. Replica plots can look domed, milky, or unevenly filled.
- SEL fit: Solid end links should meet the case with no gap or rattle. Gaps wider than a hairline point to an aftermarket or replica bracelet.
- Movement: The 3230 beats at 28,800 vph. Clone 3230 movements often show rough bridges, wrong engraving fonts, and a weaker winding feel.
What about the crown and caseback?
The winding crown should have a triplelock profile with a sharp coronet. Casebacks on the 124060 are plain and polished, so any engraved logo or sticker is a warning sign. Serial and reference engravings between the lugs should be crisp and centered.
What do replica 124060 tiers cost and contain?
China-based replica sellers split the 124060 into three rough tiers. Cheap builds use a low-beat 2813 movement and a plated case. Mid-tier builds use an A2824 or clone 3130 with better finishing. High-end "super clone" builds use a cloned 3230 and closer case geometry, but they still miss genuine tolerances.
- Entry tier: about $80 to $150, thick case, loud rotor, poor lume.
- Mid tier: about $200 to $350, better bracelet, still wrong rehaut depth.
- High tier: about $400 to $700, cloned movement, closest profile, yet not genuine.
Is buying or importing a fake 124060 legal in the US?
No. Importing counterfeit watches into the United States violates trademark law and shipments can be seized and destroyed. Buying a replica also removes any factory warranty, service support, or resale value. For a real 124060, buy from an authorized dealer or a vetted pre-owned seller with papers and service history.